Standen T2
The High Performance 2-Row Potato Harvester T2
this is a 2-row tractor trailed potato harvester developed by engineers at Standen Engineering for high output and efficiency with low crop damage.
Moving Up a Gear
this is a 2-row tractor trailed potato harvester developed by engineers at Standen Engineering for high output and efficiency with low crop damage.
Moving Up a Gear
The Standen T2 offers significantly more output. An additional front digger web and a longer sieving web provide a dramatic increase in total web area. VariSep adjustable web step separation, between the digging and sieving webs provides another major boost to output, and on-the-move adjustability.
OMEGA - Advanced Separation Technology
Developed by Standen for the T2, OMEGA is a fluted roller separating system, featuring soft deformable scroll rollers and the choice of rubber covered or steel clod rollers. OMEGA is designed to make the most of T2's high output potential. Neat, flush sides mean T2 is only 2.9m wide for transport; the wheel track is adjusted from the cab’; T2 is ready for work, or ready for the road in seconds.
Website: www.standen.co.uk
Website: www.standen.co.uk
| Title | |
| Chassis | Open plan, tubular heavy-duty welded construction |
| Power requirements (hp) | 170+ tractor, tractor oil supply/return, 12v electrics |
| PTO input (rpm) | 1000 |
| Drives | All-hydraulic variable speed, in-cab controls |
| In-cab controls | Touch Screen, programmable, joystick console, CAN-bus electrics |
| Drawbar | Hydraulic adjustment, in-cab control |
| Depth control | Automatic, left/right independent, in-cab control override |
| Depth sensing | 2 x Zero pressure rubber wheels |
| Intake discs (mm) | 4 x 740, spring loaded, with heavy-duty bearings |
| Shares | 2 x 2 piece |
| Haulm intake rollers | 2 x haulm intake rollers at outer discs, center rubber flap |
| Digging web (mm) | 36 pitch, 1620 wide, 27 degree max. web angle |
| Sieving web (mm) | 40 pitch, 1620 wide, 18-24 degree web angles |
| Sieving web step | VariSep, primary/secondary web step adjustment (20cm), in-cab control |
| Sieving web agitation | 3 x high frequency, adjustable, in-cab control |
| Haulm guides | Curved tines at top of secondary web |
| Haulm removing roller | Hydraulic driven, rubber covered 82mm, adjustable, reversible, in-cab control |
| Transfer 1 | Deformable fluted roller, clod roller |
| OMEGA separation | 2 x OMEGA units @ 1700mm working widths, each with 3 x deformable fluted rollers (60mm shafts)+3 x Ebonite or steel clod rollers |
| Transfer 2 | Deformable fluted roller, stainless steel transfer roller |
| Transfer 3 | 2 x rubber covered spreader webs (graduated) |
| Discharge elevator | Hydraulic folding, 1120mm wide, in-cab controls |
| Discharge web | Deep flight, bucket type, moving side fingers |
| Hydraulic oil Reservoir | High capacity chassis integrated |
| Hydraulic oil Cooling | Thermostatically controlled electric oil cooler chassis + natural cooling |
| Hydraulic oil Pumps | 4 x high capacity load sensing pumps |
| Hydraulic protection1 | 4 x suction filters protect pumps |
| Hydraulic protection2 | Individual pre-filters fitted in valve lines |
| Wheel steering | Hydraulic, 25 degrees, automatic self-centering, in-cab control |
| Wheel track adjustment | Right side axle on hydraulic sliding beam, in-cab control |
| Wheel drives | Hydraulic, in-cab controls=assist/constant/power boost |
| Wheels | Steel rims, Tires: Left 550/45 R22.5, Right 420/70 R24 |
| Levelling | Hydraulic, in-cab control |
| Length (m) | 10.75 |
| Width, working (m) | 3.65 |
| Width, transport (m) | 2.90 |
| Height (m) | 3.65 |
| Weight (kg) | 7500 |
| Weight at drawbar (kg) | 1800 |
| Shipping Dimensions (m) | Length 10.70 x Width 2.90 x Height 3.65 |
